Abstract for gee_tr488

Cambridge University Engineering Department Technical Report CUED/F-INFENG/TR488

3D ULTRASOUND PROBE CALIBRATION WITHOUT A POSITION SENSOR

A.H. Gee, N.E Houghton, G.M. Treece and R.W. Prager

September 2004

We present a technique for 3D ultrasound probe calibration which does not require measurements from the position sensor. The principle of operation is that the beam is aligned with a set of coplanar wires strung across a rigid frame. The probe and frame are mounted on a precision-manufactured mechanical instrument which allows adjustment and measurement of their relative pose. Semi-automatic image processing facilitates alignment of the beam and wires to within a tolerance of around 200 microns, despite the considerable beam thickness. The calibration process requires just a single view and relatively little user expertise. In a series of experiments with different ultrasound probes, we demonstrate the technique's high accuracy and precision. The latter is partly due to the elimination of the position sensor, a significant source of measurement noise, from the end-user calibration process.

[3.5 MBytes PDF, 21 pages]


(ftp:) gee_tr488.pdf (http:) gee_tr488.pdf

If you have difficulty viewing files that end '.gz', which are gzip compressed, then you may be able to find tools to uncompress them at the gzip web site.

If you have difficulty viewing files that are in PostScript, (ending '.ps' or '.ps.gz'), then you may be able to find tools to view them at the gsview web site.

We have attempted to provide automatically generated PDF copies of documents for which only PostScript versions have previously been available. These are clearly marked in the database - due to the nature of the automatic conversion process, they are likely to be badly aliased when viewed at default resolution on screen by acroread.